Quick summary

Dual arch expansion widens the upper and lower arches together, with a fixed orthopedic expander on each, so the posterior occlusion stays coordinated as the arches develop. In Dual Arch Orthopedics, the technique I developed, it starts in the early mixed dentition and is anchored on the second primary molars.

  • Select the case on the soft tissues as well as the space analysis.
  • Start during or just after the transition of the incisors, when arch width and length are greatest.
  • Band both expanders to the second primary molars (the E's), not the first permanent molars.
  • Turn both screws a quarter turn every four days, and pause one arch when the other needs to catch up.
  • Bracket the anterior teeth once transverse development is under way, then retain and plan Phase II.

Table of Contents

Step 1: Assess the Case

A dual arch plan starts with a diagnosis, not a device. In my office, case selection depends heavily on the soft tissues, the profile, lip thickness and nasolabial angle, as well as on the total discrepancy in the mixed dentition and the orthodontic analyses. Treatment is typically limited to total discrepancies of 5.0 mm or less, although with the E-space intact, crowding in the 7 to 8 mm range can be resolved.

The indications I look for:

  • Narrow arch widths
  • Anterior crowding or rotations
  • Ectopic eruption of the lower incisors
  • Early loss of a primary cuspid
  • Blocked-out or rotated incisors on the radiograph
  • Resorption of adjacent tooth roots on the radiograph

Measure the intermolar and intercanine widths in both arches, and note whether a crossbite is skeletal, dental or functional. The airway belongs in the plan as well: the posterior airway space, the size of the tonsils and adenoids, snoring, mouth breathing, allergies, habits and rest oral posture.

Step 2: Time It to the Incisor Transition

The ideal time to start is during, or just after, the transition of the upper and lower incisors. The lateral width of the upper and lower jaws grows most as the upper centrals and lower laterals erupt, and the arch length is at its greatest during this transition. It decreases as the posterior primary teeth are replaced by permanent teeth.

Waiting rarely helps: crowding after the first transition does not improve with continued growth or advancing age.

Step 3: Fit Fixed Expanders on Both Arches

Both expanders are fixed, cemented with glass ionomer, so there is no cooperation to manage. They are banded to the second primary molars (the E's), not the first permanent molars, so treatment can start before the six-year molar roots are complete, and resorption or blunting of those roots is minimized. The E's need enough root development to stay in place until the expanders come off.

Lingual extensions run from the primary cuspids to the first permanent molars, so the molars expand and the cuspids move laterally as the screw is turned. The two appliances are not identical, and they do not do the same thing:

FeatureUpper ExpanderLower Expander
AnchorsBands on the second primary molarsBands on the second primary molars
ScrewStandard expansion screwSmaller Palex screw
ExtensionsPrimary cuspids to first permanent molarsPrimary cuspids to first permanent molars
What changesTrue expansionAlveolar remodeling, which lets the posterior teeth upright

Step 4: Activate and Keep the Arches Coordinated

I turn both screws one quarter turn every four days. Expansion on either appliance can be stopped for a while to let the opposing arch catch up if the posterior teeth are nearing a crossbite, and that is what keeps the posterior occlusion coordinated throughout treatment while the incisors are coupled anteriorly.

In the case I published, the child was seen about every four weeks, and expansion ran, off and on, for six to eight months until lateral arch development was sufficient.

Step 5: Bracket and Advance the Anterior Teeth

Once transverse development is under way in the upper arch, I bracket the upper anterior teeth and continue sagittal and transverse development until the arch form is slightly overcorrected. Lower bracketing can lag behind the uppers when the lower laterals erupt late or the lower anterior arch is constricted.

Arch width and arch length are adjusted for each child with the expanders, the anterior brackets and the archwires. Locks on the archwires mesial to the molar tubes act as stops, and they can be adjusted to advance the anterior teeth.

Step 6: Monitor, Retain and Plan Phase II

Re-measure the arch widths as you go, and at each visit check the posterior occlusion in both arches and the gingival tissue where teeth are moving buccally.

In the case I published, Phase I took 18 months. Retention was an upper removable Hawley and a banded lower lingual holding arch, adjusted at intervals to let the permanent premolars and cuspids erupt. In my practice 85 to 90 percent of children need a second phase, which averages 9 to 12 months and typically starts with or soon after the eruption of the second permanent molars.

My article Dual Arch Orthopedics: Phase I Treatment in the Early Mixed Dentition walks through that case from records to retention, with the appliance design in detail.

Learning the Technique

Dual arch expansion with 2×4 fixed appliances is one of the things Early Orthodontic Treatment teaches: appliance selection, anchorage on the primary dentition, turn rates with and without a posterior crossbite, and the initial archwire. It is the course that came out of my work, taught from thirty years of documented cases: 19 recorded lessons, 16 h 28 min in all, with one year of case mentorship with me. Lesson 13, The Orthodontic Relationship between Facial Growth and Occlusion, is free to watch in full.

Frequently Asked Questions

What is dual arch expansion in orthodontics?

It is the coordinated widening of both arches in the same treatment plan, with a fixed expander on each, so the posterior occlusion stays matched as width is gained. In Dual Arch Orthopedics, the technique I developed, both expanders are banded to the second primary molars and treatment starts in the early mixed dentition.

When should dual arch expansion start?

During, or just after, the transition of the upper and lower incisors. That is when the lateral width of the jaws grows most and the arch length is at its greatest, and crowding after that first transition does not improve with continued growth.

How often are the expanders turned?

One quarter turn every four days, on both the upper and the lower expander. Either one can be paused for a while to let the opposing arch catch up if the posterior teeth are nearing a crossbite.

What are the risks and limitations of arch expansion?

Case selection is the first limit: I typically treat total discrepancies of 5.0 mm or less, and the second primary molars need enough root to carry the expanders until they come off. Expansion should stop when the arches are coordinated, not simply when they are wider. And Phase I rarely finishes the job: in my practice 85 to 90 percent of children go on to a second phase.